Determining by Raman spectroscopy the average thickness and N-layer-specific surface coverages of MoS₂ thin films with domains much smaller than the laser spot size

• Felipe Wasem Klein,
• Jean-Roch Huntzinger,
• Vincent Astié,
• Damien Voiry,
• Romain Parret,
• Houssine Makhlouf,
• Sandrine Juillaguet,
• Jean-Manuel Decams,
• Sylvie Contreras,
• Périne Landois,
• Ahmed-Azmi Zahab,
• Jean-Louis Sauvajol and
• Matthieu Paillet

Beilstein J. Nanotechnol. 2024, 15, 279–296, doi:10.3762/bjnano.15.26

• modes is proposed to evaluate the surface coverage for each N (i.e., the ratio between the surface covered by exactly N layers and the total surface) in DLI-PP-CVD MoS2 samples. Keywords: molybdenum disulfide; number of layers; Raman spectroscopy; thin film; transition metal dichalcogenides

• X–M–X or MX2 triatomic layer, where X is a chalcogen atom (e.g., sulfur, selenium, or tellurium) and M is a transition metal atom (e.g., molybdenum or tungsten) [10]. Among the layered TMD materials, molybdenum disulfide, MoS2, is of particular interest in optoelectronic applications because of its

Influence of thickness and morphology of MoS₂ on the performance of counter electrodes in dye-sensitized solar cells

• Lam Thuy Thi Mai,
• Hai Viet Le,
• Ngan Kim Thi Nguyen,
• Van La Tran Pham,
• Thu Anh Thi Nguyen,
• Nguyen Thanh Le Huynh and
• Hoang Thai Nguyen

Beilstein J. Nanotechnol. 2022, 13, 528–537, doi:10.3762/bjnano.13.44

• : cyclic voltammetry (CV); dye-sensitized solar cells (DSSCs); electrocatalytic activity; honeycomb-like; molybdenum disulfide (MoS2); thin film; Introduction Since Grätzel’s first report in 1991, dye-sensitized solar cells (DSSCs) have been the subject of much research due to the easy fabrication process

• compounds are considered a potential approach due to the high activity and acceptable price. Molybdenum disulfide (MoS2) has recently gained a lot of attention due to its layered structure, cost efficiency, and superior catalytic activity [9][10][11][12][13][14][15][16]. MoS2 exhibits layered structures

• City, 700000, Vietnam Vietnam National University Ho Chi Minh City, Linh Trung Ward, Thu Duc City, Ho Chi Minh City, 700000, Vietnam 10.3762/bjnano.13.44 Abstract Non-platinum electrodes for photoelectric devices are challenging and attractive to the scientific community. A thin film of molybdenum

Prediction of Co and Ru nanocluster morphology on 2D MoS₂ from interaction energies

• Cara-Lena Nies and
• Michael Nolan

Beilstein J. Nanotechnol. 2021, 12, 704–724, doi:10.3762/bjnano.12.56

• . Based on this understanding, we propose Co on MoS2 as a suitable candidate for advanced interconnects, while Ru on MoS2 is more suited to catalysis applications. Keywords: cobalt (Co); 2D materials; molybdenum disulfide (MoS2); ruthenium (Ru); thin film nucleation; Introduction Layered materials that

A review of defect engineering, ion implantation, and nanofabrication using the helium ion microscope

• Frances I. Allen

Beilstein J. Nanotechnol. 2021, 12, 633–664, doi:10.3762/bjnano.12.52

Free and partially encapsulated manganese ferrite nanoparticles in multiwall carbon nanotubes

• Saja Al-Khabouri,
• Salim Al-Harthi,
• Toru Maekawa,
• Mohamed E. Elzain,
• Ashraf Al-Hinai,
• Ahmed D. Al-Rawas,
• Abbsher M. Gismelseed,
• Ali A. Yousif and
• Myo Tay Zar Myint

Beilstein J. Nanotechnol. 2020, 11, 1891–1904, doi:10.3762/bjnano.11.170

• removal of harmful pollutants [8], carbon nanotubes decorated with molybdenum disulfide are used in microbial fuel cells [9] and photoelectric detectors [10], supercapacitor electrodes use binary metal oxide/multiwall carbon nanotubes (MWCNTs) [11], among other numerous recently developed applications [12

Effect of localized helium ion irradiation on the performance of synthetic monolayer MoS₂ field-effect transistors

• Jakub Jadwiszczak,
• Pierce Maguire,
• Conor P. Cullen,
• Georg S. Duesberg and
• Hongzhou Zhang

Beilstein J. Nanotechnol. 2020, 11, 1329–1335, doi:10.3762/bjnano.11.117

• study of the electrical performance of chemically synthesized monolayer molybdenum disulfide (MoS2) field-effect transistors irradiated with a focused helium ion beam as a function of increasing areal irradiation coverage. We determine an optimal coverage range of approx. 10%, which allows for the

• materials; Introduction Layered two-dimensional (2D) semiconductors have come to the fore in recent years as promising candidates for the implementation of flexible, transparent, and low-power electronics. In particular, transition metal dichalcogenides (TMDs), such as molybdenum disulfide (MoS2), have

Monolayers of MoS₂ on Ag(111) as decoupling layers for organic molecules: resolution of electronic and vibronic states of TCNQ

• Asieh Yousofnejad,
• Gaël Reecht,
• Nils Krane,
• Christian Lotze and
• Katharina J. Franke

Beilstein J. Nanotechnol. 2020, 11, 1062–1071, doi:10.3762/bjnano.11.91

• the modes with strong electron–phonon coupling. Keywords: decoupling layer; molybdenum disulfide (MoS2); scanning tunneling microscopy, tetracyanoquinodimethane (TCNQ); vibronic states; Introduction When molecules are adsorbed on metal surfaces, their electronic states are strongly perturbed by

DFT calculations of the structure and stability of copper clusters on MoS₂

• Cara-Lena Nies and
• Michael Nolan

Beilstein J. Nanotechnol. 2020, 11, 391–406, doi:10.3762/bjnano.11.30

• character of Cu nanoclusters is preserved. Keywords: copper (Cu); density functional theory (DFT); 2D materials; molybdenum disulfide (MoS2); thin film nucleation; Introduction Since the successful exfoliation of monolayers of graphene by Novoselov et al., 2D materials have gained a large interest in a

Design and facile synthesis of defect-rich C-MoS₂/rGO nanosheets for enhanced lithium–sulfur battery performance

• Chengxiang Tian,
• Juwei Wu,
• Zheng Ma,
• Bo Li,
• Pengcheng Li,
• Xiaotao Zu and
• Xia Xiang

Beilstein J. Nanotechnol. 2019, 10, 2251–2260, doi:10.3762/bjnano.10.217

• construction of other high-performance metal disulfide electrodes for electrochemical energy storage. Keywords: annealing; double modification; high-performance electrodes; lithium–sulfur battery; molybdenum disulfide (MoS2); reduced graphene oxide (rGO); Introduction Lithium–sulfur (Li–S) batteries have

Flexible freestanding MoS₂-based composite paper for energy conversion and storage

• Florian Zoller,
• Jan Luxa,
• Thomas Bein,
• Dina Fattakhova-Rohlfing,
• Daniel Bouša and
• Zdeněk Sofer

Beilstein J. Nanotechnol. 2019, 10, 1488–1496, doi:10.3762/bjnano.10.147

• devices where high flexibility and mechanical strength are desired. Keywords: flexible composites; hydrogen evolution reaction (HER); lithium ion batteries (LIBs); molybdenum disulfide; nanoarchitectonics; supercapacitors; Introduction The world’s growing population has a nearly ever-increasing demand

Trapping polysulfide on two-dimensional molybdenum disulfide for Li–S batteries through phase selection with optimized binding

• Sha Dong,
• Xiaoli Sun and
• Zhiguo Wang

Beilstein J. Nanotechnol. 2019, 10, 774–780, doi:10.3762/bjnano.10.77

• batteries. Keywords: Li–S batteries; molybdenum disulfide; phase transformation; Introduction To satisfy the increasing demand for high-capacity energy storage systems, rechargeable lithium–sulfur (Li–S) batteries have attracted much attention in recent years due to a high theoretical specific energy

Direct observation of the CVD growth of monolayer MoS₂ using in situ optical spectroscopy

• Claudia Beatriz López-Posadas,
• Yaxu Wei,
• Wanfu Shen,
• Daniel Kahr,
• Michael Hohage and
• Lidong Sun

Beilstein J. Nanotechnol. 2019, 10, 557–564, doi:10.3762/bjnano.10.57

• dichalcogenide (2D TMDC) materials. However, it is very challenging to carry out such studies during chemical vapor deposition (CVD). Here, we report the first, real time, in situ study of the CVD growth of 2D TMDCs. More specifically, the CVD growth of a molybdenum disulfide (MoS2) monolayer on sapphire

• spectroscopy; molybdenum disulfide (MoS2) monolayer; two-dimensional transition-metal dichalcogenides (2D TMDC); Introduction Two-dimensional transition metal dichalcogenide (2D TMDC) materials have drawn wide attention because of their fascinating physical and chemical properties [1][2][3][4][5][6]. Given

Toward the use of CVD-grown MoS₂ nanosheets as field-emission source

• Geetanjali Deokar,
• Nitul S. Rajput,
• Junjie Li,
• Francis Leonard Deepak,
• Wei Ou-Yang,
• Nicolas Reckinger,
• Carla Bittencourt,
• Jean-Francois Colomer and
• Mustapha Jouiad

Beilstein J. Nanotechnol. 2018, 9, 1686–1694, doi:10.3762/bjnano.9.160

• ; molybdenum disulfide (MoS2); nanosheets; sulfurization; transmission electron microscopy (TEM); Introduction There is a great interest in the development of one- and two-dimensional (1D and 2D) materials for field-emission (FE) based cathodes using various nanostructured materials [1] for applications in

Free-radical gases on two-dimensional transition-metal disulfides (XS₂, X = Mo/W): robust half-metallicity for efficient nitrogen oxide sensors

• Chunmei Zhang,
• Yalong Jiao,
• Fengxian Ma,
• Sri Kasi Matta,
• Steven Bottle and
• Aijun Du

Beilstein J. Nanotechnol. 2018, 9, 1641–1646, doi:10.3762/bjnano.9.156

• ][16], phosphorene [9], siligraphene (SiC5) [10] and molybdenum disulfide (MoS2) [11][17] possess a high specific surface area and high electrical conductivity making them the ideal candidates for gas sensors. In particular, investigations of XS2-based (X = Mo, W) monolayer nanodevices demonstrate that

Intercalation of Si between MoS₂ layers

• Rik van Bremen,
• Qirong Yao,
• Soumya Banerjee,
• Deniz Cakir,
• Nuri Oncel and
• Harold J. W. Zandvliet

Beilstein J. Nanotechnol. 2017, 8, 1952–1960, doi:10.3762/bjnano.8.196

• , Grand Forks, ND 58202, USA 10.3762/bjnano.8.196 Abstract We report a combined experimental and theoretical study of the growth of sub-monolayer amounts of silicon (Si) on molybdenum disulfide (MoS2). At room temperature and low deposition rates we have found compelling evidence that the deposited Si

• . (Adv. Mater. 2014, 26, 2096–2101) that silicon forms a highly strained epitaxial layer on MoS2. Finally, density functional theory calculations indicate that silicene clusters encapsulated by MoS2 are stable. Keywords: intercalation; molybdenum disulfide; scanning tunneling microscopy; silicene; two

• Fermi level. Van der Waals materials with a band gap do not suffer from this limitation. Molybdenum disulfide (MoS2) is a member of the transition metal dichalcogenide (TMD) family that belongs to the class of van der Waals materials. Bulk MoS2 has a band gap of 1.29 eV, which increases to 1.90 eV for a

3D continuum phonon model for group-IV 2D materials

• Morten Willatzen,
• Lok C. Lew Yan Voon,
• Appala Naidu Gandi and
• Udo Schwingenschlögl

Beilstein J. Nanotechnol. 2017, 8, 1345–1356, doi:10.3762/bjnano.8.136

• molybdenum disulfide. The origin of quadratic modes is clarified. Mode coupling for both graphene and silicene is obtained, contrary to previous works. Our model allows us to predict the existence of confined optical phonon modes for the group-IV materials but not for molybdenum disulfide. A comparison of

• the long-wavelength modes to density-functional results is included. Keywords: graphene; molybdenum disulfide; phonon; silicene; two-dimensional materials; Introduction Phonon spectra in two-dimensional (2D) nanomaterials have almost exclusively been computed using density-functional theory (DFT

• beyond the analytical solutions sought for in the current manuscript. Furthermore, we have included a study of a well-known compound 2D material (molybdenum disulfide MoS2) in order to further understand the properties derived for the elemental materials. Results and Discussion Continuum model The 2D

Growth, structure and stability of sputter-deposited MoS₂ thin films

• Reinhard Kaindl,
• Bernhard C. Bayer,
• Roland Resel,
• Thomas Müller,
• Viera Skakalova,
• Gerlinde Habler,
• Rainer Abart,
• Alexey S. Cherevan,
• Dominik Eder,
• Maxime Blatter,
• Fabian Fischer,
• Jannik C. Meyer,
• Dmitry K. Polyushkin and
• Wolfgang Waldhauser

Beilstein J. Nanotechnol. 2017, 8, 1115–1126, doi:10.3762/bjnano.8.113

• amorphous MoS2 films, deposited via simple electro-polymerization procedures, the precatalysts could be MoS3 or MoS2; the active form of the catalysts was identified as amorphous MoS2 [19]. Narrow molybdenum disulfide nanosheets with the edge-terminated structure and a significantly expanded interlayer were

• synthesized through reduction and microwave heating [18]. The expanded interlayer distance with modified electronic structure is also responsible for the observed catalytic improvement, which suggests a potential way to design newly advanced molybdenum disulfide catalysts through modulating the interlayer

Fracture behaviors of pre-cracked monolayer molybdenum disulfide: A molecular dynamics study

• Qi-lin Xiong,
• Zhen-huan Li and
• Xiao-geng Tian

Beilstein J. Nanotechnol. 2016, 7, 1411–1420, doi:10.3762/bjnano.7.132

• and Vibration, Xi’an Jiaotong University, Xi’an 710049, China 10.3762/bjnano.7.132 Abstract The fracture strength and crack propagation of monolayer molybdenum disulfide (MoS2) sheets with various pre-existing cracks are investigated using molecular dynamics simulation (MDS). The uniaxial tensions of

• model without finite size effect. Finally, the MDS results of monolayer MoS2 sheets with different angled crack are also analyzed based on the continuum fracture mechanics model. Keywords: crack propagation; fracture strength; molecular dynamics simulation; monolayer molybdenum disulfide; pre-existing

• conductivity of defect-free SLMoS2 by using classical MDS. Dang et al. [16] used MDS with a reactive empirical bond order potential to study the mechanical deformation and failure of monolayer molybdenum disulfide under uniaxial and multiaxial tension. Zhao et al. [17] investigated the influence of temperature

Synthesis and applications of carbon nanomaterials for energy generation and storage

• Marco Notarianni,
• Jinzhang Liu,
• Kristy Vernon and
• Nunzio Motta

Beilstein J. Nanotechnol. 2016, 7, 149–196, doi:10.3762/bjnano.7.17

• of the system (Figure 13) [77]. It should be mentioned that graphene is not the only 2D material today that offers great performance for a wide range of applications [78]. Boron nitride and molybdenum disulfide are examples of other 2D materials that offer the possibility to tune material and device

DNA origami deposition on native and passivated molybdenum disulfide substrates

• Xiaoning Zhang,
• Masudur Rahman,
• David Neff and
• Michael L. Norton

Beilstein J. Nanotechnol. 2014, 5, 501–506, doi:10.3762/bjnano.5.58

• prerequisite for the successful fabrication of hybrid DNA origami/semiconductor-based biomedical sensor devices. Molybdenum disulfide (MoS2) is an ideal substrate for such future sensors due to its exceptional electrical, mechanical and structural properties. In this work, we performed the first investigations

• significantly longer times. These findings will be beneficial for the fabrication of future DNA origami/MoS2 hybrid electronic structures. Keywords: atomic force microscopy (AFM); DNA origami; molybdenum disulfide (MoS2); pyrene; 1-pyrenemethylamine; surface modification; Introduction Since it was first

• properties, so as to enable complex and diverse circuit designs, thereby providing functionality essential for the construction of sensing biodevices with extraordinary sensitivity, rapid readout and good stability. As a layered two-dimensional (2D) material, molybdenum disulfide (MoS2) exhibits robust

Effect of contaminations and surface preparation on the work function of single layer MoS₂

• Oliver Ochedowski,
• Kolyo Marinov,
• Nils Scheuschner,
• Artur Poloczek,
• Benedict Kleine Bussmann,
• Janina Maultzsch and
• Marika Schleberger

Beilstein J. Nanotechnol. 2014, 5, 291–297, doi:10.3762/bjnano.5.32

• , two-dimensional materials are being targeted in a variety of research areas like surface physics, electrical engineering, chemistry and biomedical applications [1][2][3][4]. The 2D-material getting the most attention besides graphene are single layers of molybdenum disulfide (SLM) which consist of a